Battery Operated Hydraulic Tools

Model TREC-3410 ROBO*CRIMP™
12 Ton Battery Powered Compression Tool – 1” Jaw Opening

Huskie is giving you more tool speed and easier handling with our TREC-3410 battery powered compression tool. It features a rubber boot and it is designed to accommodate all 12 ton “U” type dies widely used throughout the electrical industry.

The TREC-3410 is faster and more compact than our previous model. It offers a wider handle opening with finger grooves, allowing easier access for gloved work. The base of the tool is contoured for stability and incorporates finger grooves for a better grip.

Features

  • Tested Up to 75kV
  • Rotational Head
  • Rapid Advance
  • Ergonomically Balanced
  • Weather Resistant Housing
  • Audible Bypass when Predetermined Pressure is Achieved
  • Includes DIE-CASE
  • Protective Rubber Boot on “C” Head

Model TREC-5430 ROBO*CRIMP
12 Ton Battery Powered Compression Tool– 1-3/16” Jaw Opening

The TREC-5430 weighing just 14.75 pounds was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work.

The TREC-5430 was designed from the same hydraulic system as our TREC-558U featuring a rapid advance ram to reduce cycle time. It accepts all 12 ton “U” type dies and is capable of 750 MCM copper lugs and 600 MCM copper splices.

Features

  • One Hand Operation
  • Tested Up to 75kV
  • Rotational Head
  • Rapid Advance
  • Ergonomically Balanced
  • Ergonomic Pistol Grip Handle
  • Weather Resistant Housing
  • Audible Bypass when Predetermined Pressure is Achieved
  • Protective Rubber Boot on “C” Head

Model TREC-S524H ROBO*CUT
8 Ton Battery Powered Cutter – .95” Jaw Opening

The TREC-S524H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters. The TREC-S524 was designed from the same hydraulic system as the TREC-558U featuring a rapid advance ram for reduced cycle times.

With the pull of the trigger, you can cut ACSR cables up to 477, standard guy wires to 5/8”, and ground rods to 5/8”. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters. The TREC-S524H has an overload bypass, which will “kick out” when tool reaches 8 tons or is attempting to cut materials beyond its capacities.

Features

  • Flip-Top Latching Head
  • Tested Up to 75kV
  • One Hand Operation
  • Rotational Head
  • Rapid Advance
  • Ergonomically Balanced
  • Ergonomic Pistol Grip Handle
  • Weather Resistant Housing
  • Overload Bypass Protection

Model TEP-410H
12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening

The TEP-410H is a traditional C-head with a one-inchjaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market.

A 10,000 psi external pump is required to operate the C-head. The output pressure is 12 tons when the pump is set at 10,000 psi. After a compression is made on a lug or sleeve, an internal ram spring retracts the jaw when the pump pressure is relieved. The tool is supplied with a standard 3/8” male, screw type coupler but can be fitted with an opposite female coupler if requested. Carrying case included.

Feature
• Protective Rubber Boot on “C” Head

NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).

 

Huskie was the first to market the battery operated tool in the early 1990s and still maintains a single battery operated system (14.4 volts) that fits all five product generations introduced over the past fifteen years. Huskie has invented a variety of new tool designs to meet the expanding needs of the Electric Utility Industry.  In fact last month Huskie introduced the first Lithium Ion battery into the crimper/connector market to show a dedication to the “green” cultural movement. The new battery system is completely interchangeable with all generations of past Huskie tools. 

Huskie Tools has several new tool product designs in various stages of development.  Most of these tools are new generations of previously released and successful tools that are targeted for increased penetration within the Utility Industry.

   
U.S. Rigging Supply • 1600 East Mc Fadden Avenue, Santa Ana, CA 92705 • Tel. (714) 545-7444 • Fax (714) 545-3311
| Home | Anchors - Tree Guy | ANSI Products | Architectural Railing/Cable Rail | Cable & Cable Assemblies | Fiber Ropes | Fiddle Block & Flip Lines |
| Gripples | Halyard Kits | Hardware - Climbing, Safety, Marine and Rigging | KONG Products | Swage Sleeves - Oval & Stop Sleeves | Tools | Wire Rope |