Rigging Products - Turnbuckles

Turnbuckles supply tension by adjusting the length for supporting rope, wire rope, and chain. At its most basic, a turnbuckle is a couple of threaded eye bolts linked to its torso. However, the end fittings can also be a jaw or hook, depending on the specific need of the turnbuckle. The instruments at each end (i.e. eye, jaw, hook) are adjustable and thread into the body frame. Turnbuckles vary in diameters and lengths which add to the usefulness of each type. For example, a large diameter yields a higher load capacity whereas length allows for better adjustment capability.

Eye and Eye 316 Stainless
(Metric Thread) Turnbuckles


Hook and Eye 316 Stainless
(Metric Thread) Turnbuckles

Jaw and Jaw 316 Stainless
(Metric Thread) Turnbuckles

Eye and Eye Electro Galvanized
(Metric Thread) Turnbuckles

*WLL (Working Load Limit) is approximately 10% of average break strength which allows for a 10-to-1 safety factor.

U.S. Rigging Supply • 1600 East Mc Fadden Avenue, Santa Ana, CA 92705 • Tel. (714) 545-7444 • Fax (714) 545-3311
| Home | Anchors - Tree Guy | ANSI Products | Architectural Railing/Cable Rail | Cable & Cable Assemblies | Fiber Ropes | Fiddle Block & Flip Lines |
| Gripples | Halyard Kits | Hardware - Climbing, Safety, Marine and Rigging | KONG Products | Swage Sleeves - Oval & Stop Sleeves | Tools | Wire Rope |